| Lintho | Bokgoni |
| Palo ea lera | 1-40 lera |
| Mofuta oa laminate | FR-4(High Tg, Halogen Free, High Frequency) |
| FR-5, CEM-3, PTFE, BT, Getek, Aluminium base, Copper base, KB, Nanya, Shengyi, ITEQ, ILM, Isola, Nelco, Rogers, Arlon |
| Botenya ba boto | 0.2mm-6mm |
| Max Base boima ba koporo | 210um (6oz) bakeng sa lera le ka hare la 210um (6oz) bakeng sa lera le ka ntle |
| Boholo ba boro ea mochini | 0.2mm (0.008") |
| Aspect ratio | 12:01 |
| Boholo bo boholo ba phanele | lehlakore le le leng kapa mahlakoreng a mabeli: 500mm * 1200mm, |
| Mekhahlelo e mengata:508mm X 610mm (20" X 24") |
| Bophara ba mola/sebaka | 0.076mm / 0.0.076mm (0.003" / 0.003") |
| Ka mofuta oa lesoba | O foufetse / o patiloe / o kentsoe (VOP,VIP…) |
| HDI / Microvia | EE |
| Qetello ea bokaholimo | HASL |
| Etellang Free HASL |
| Khauta e Kentsoeng (ENIG), Tin ea ho qoelisoa, Silivera ea ho qoelisoa |
| Organic Solderability Preservative (OSP) / ENTEK |
| Khauta ea Flash(Hard Gold plating) |
| ENEPIG |
| Khetho ea Khauta, Botenya ba Khauta ho fihla ho 3um(120u") |
| Monoana oa Khauta, Khabone e hatisoang, e Peelable S/M |
| 'Mala oa mask oa solder | Botala, Boputsoa, Bosoeu, Botsho, Bo hlakile, joalo-joalo. |
| Tšitiso | Tsela e le 'ngoe, phapang, impedance ea coplanar e laoloang ± 10% |
| Mofuta oa ho qetela oa setšoantšo | Tsamaiso ea CNC;V-Scoring / Cut;Tebeletsa |
| Mamello | Tolerance ea Min Hole (NPTH) | ± 0.05 limilimithara |
| Tolerance ea Min Hole (PTH) | ± 0.075mm |
| Mamello ea Min Pattern | ± 0.05 limilimithara |
