Moetsi oa Tlholisano ea PCB

6 layer impedance control board e thata-flex e nang le stiffener

Tlhaloso e Khutšoanyane:

Mofuta oa lintho tse bonahalang: FR-4, polyimide

Sebaka se fokolang sa trace wide/sebaka: 4 mil

Min lesoba boholo: 0.15mm

Botenya bo felileng: 1.6mm

Botenya ba FPC: 0.25mm

Botenya ba koporo bo felileng: 35um

Qetella: ENIG

'Mala oa mask oa solder: khubelu

Nako ea ho tsamaisa: matsatsi a 20


Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Rigid -flex board

Mofuta oa lintho tse bonahalang: FR-4, polyimide

Sebaka se fokolang sa trace wide/sebaka: 4 mil

Min lesoba boholo: 0.15mm

Botenya bo felileng: 1.6mm

Botenya ba FPC: 0.25mm

Botenya ba koporo bo felileng: 35um

Qetella: ENIG

'Mala oa mask oa solder: khubelu

Nako ea ho tsamaisa: matsatsi a 20

Tsoalo le nts'etsopele ea FPC le PCB e ile ea tsoala sehlahisoa se secha sa boto e thata -flex.Ka hona, ho PCB prototyping, boto ea potoloho e tenyetsehang le boto e thata li kopantsoe hammoho ho latela litlhoko tse amehang tsa theknoloji kamora ho hatella le mekhoa e meng ho theha boto ea potoloho e nang le litšobotsi tsa FPC le litšobotsi tsa PCB.

Ho prototyping ea PCB, motsoako oa boto e thata le FPC e fana ka tharollo e ntle ka ho fetisisa maemong a sebaka se lekanyelitsoeng.Theknoloji ena e fana ka monyetla oa ho hokahanya likarolo tsa sesebelisoa ka mokhoa o sireletsehileng ha ho ntse ho netefatsa polarity le botsitso ba ho kopana, le ho fokotsa palo ea likarolo tsa plug le sehokelo.

Melemo e meng ea rigid_flex board ke botsitso bo matla le bo sebetsang, bo fellang ka tokoloho ea moralo oa 3d, ho kenngoa ho nolofalitsoeng, ho boloka sebaka, le tlhokomelo ea litšobotsi tsa motlakase tse tšoanang.

Likopo tsa ho etsa li-Rigid-Flex PCBs:

Li-PCB tsa Rigid-Flex li fana ka mefuta e mengata ea lisebelisoa, ho tloha ho lisebelisoa tse bohlale ho isa ho liselefouno le lik'hamera tsa digital.Ka mokhoa o ntseng o eketseha, ho sebelisoa ha boto e thata-thata ho 'nile ha sebelisoa lisebelisoa tsa bongaka tse kang li-pacemaker bakeng sa sebaka sa tsona le bokhoni ba ho fokotsa boima ba' mele.Melemo e ts'oanang ea ts'ebeliso ea PCB e thata-flex e ka sebelisoa ho litsamaiso tse bohlale tsa taolo.

Lihlahisoang tsa bareki, rigid-flex ha e phahamise sebaka le boima ba 'mele feela empa e ntlafatsa ts'epahalo haholo, e felisa litlhoko tse ngata tsa manonyeletso le lithapo tse pshatlehang tse nang le mathata a amanang le khokahano.Ena ke mehlala e meng feela, empa li-PCB tsa Rigid-Flex li ka sebelisoa ho thusa hoo e batlang e le lits'ebetso tsohle tsa motlakase tse tsoetseng pele ho kenyelletsa lisebelisoa tsa tlhahlobo, lisebelisoa le likoloi.

Rigid-Flex PCBs Theknoloji le Ts'ebetso ea Tlhahiso:

Hore na e hlahisa prototype e thata kapa palo ea tlhahiso e hlokang tlhahiso e kholo ea Rigid-Flex PCBs le kopano ea PCB, theknoloji e netefalitsoe ebile e tšepahala.Karolo ea flex PCB e ntle ka ho khetheha ho hlola mathata a sebaka le boima ba sebaka ka likhato tsa tokoloho.

Ho nahanisisa ka hloko ka tharollo ea Rigid-Flex le tlhahlobo e nepahetseng ea likhetho tse fumanehang methating ea pele ea mokhahlelo oa moralo oa PCB o thata o tla khutlisa melemo e mengata.Moetsi oa li-PCBs tsa Rigid-Flex o tlameha ho kenya letsoho qalong ea moralo ho netefatsa hore likarolo tsa moralo le masela li hokahane le ho ikarabella bakeng sa phapang ea sehlahisoa sa ho qetela.

Mokhahlelo oa tlhahiso ea Rigid-Flex o boetse o rarahane ebile o nka nako ho feta masela a thata a boto.Likarolo tsohle tse feto-fetohang tsa kopano ea Rigid-Flex li na le lits'ebetso tse fapaneng ka ho fetesisa tsa ho ts'oaroa, ho ts'oara, le ho solder ho feta liboto tse thata tsa FR4.

Melemo ea li-PCB tsa Rigid-Flex

• Litlhoko tsa sebaka li ka fokotsoa ka ho sebelisa 3D

• Ka ho tlosa tlhokahalo ea li-connectors le lithapo pakeng tsa likarolo tse thata tsa motho ka mong, boholo ba boto le boima ba tsamaiso ka kakaretso bo ka fokotsoa.

• Ka ho eketsa sebaka, hangata ho na le palo e tlaase likarolong.

• Linonyello tse fokolang tsa solder li tiisa botšepehi bo phahameng ba khokahanyo.

• Ho tšoara nakong ea kopano ho bonolo ha ho bapisoa le mapolanka a tenyetsehang.

• Tsamaiso ea kopano ea PCB e nolofalitsoeng.

• Mabitso a kopantsoeng a ZIF a fana ka lihokelo tse bonolo tsa modular tikolohong ea sistimi.

• Maemo a teko a nolofalitsoe.Tlhahlobo e feletseng pele ho kenya ho khoneha.

• Litšenyehelo tsa tsamaiso le kopano li fokotsehile haholo ka liboto tsa Rigid-Flex.

• Hoa khoneha ho eketsa ho rarahana ha meralo ea mochini, e leng ho ntlafatsang boemo ba tokoloho bakeng sa tharollo e ntlafalitsoeng ea matlo.

C'me re sebelisa FPC ho nka sebaka sa boto e thata?

Liboto tsa potoloho tse feto-fetohang li na le thuso, empa li ke ke tsa nkela liboto tsa potoloho tse thata bakeng sa lits'ebetso tsohle.Litšenyehelo ke ntlha ea bohlokoa,.Liboto tsa potoloho tse thata ha li theko e tlase ho etsa le ho kenya setsing se tloaelehileng sa ho etsa li-volume tse phahameng.

Ka tloaelo, tharollo e loketseng bakeng sa sehlahisoa sa boqapi ke e kenyelletsang potoloho e feto-fetohang ha ho hlokahala mme e sebelisa liboto tsa potoloho tse tiileng, tse tšepahalang moo ho ka khonehang ho boloka litšenyehelo tsa tlhahiso le kopano li fokotsehile.


  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa wa hao mona mme o re romele wona

    MEKHATLO EA LIHLAHISO

    Tsepamisa maikutlo ho faneng ka tharollo ea mong pu bakeng sa lilemo tse 5.